الاستلام غير متوفر حاليًا
قابس لينكايند الذكي بتقنية Matter
الاستلام غير متوفر حاليًا
قد يعجبك أيضاً
أنشئ منزلك الذكي
استخدم القابس الذكي Linkind Matter للتحكم في الأجهزة الأخرى المتصلة به وإنشاء تجربة معيشة منزلية ذكية.



إعداد سهل، تحكم واحد
لا حاجة لتنزيل تطبيقات مختلفة للمصنعين بعد الآن.
توجه مباشرة إلى منصات المنزل الذكي مثل Apple Home، Alexa، Google Home، SmartThings، أو AiDot للتحكم في جميع أجهزتك المتوافقة مع Matter.

المؤقت والجدولة
يمكنك جدولة الأجهزة المرتبطة بالقابس الذكي Linkind Matter لتشغيلها أو إيقاف تشغيلها في أوقات محددة.

التحكم عن بعد عبر التطبيق
استخدم التطبيق لتشغيل الأجهزة الإلكترونية قبل وصولك إلى المنزل وإيقاف تشغيلها بعد مغادرتك، بغض النظر عن مكان وجودك.

تسمية كل منها بشكل خاص
تسمية كل منفذ تجعل من السهل إدارة الجهاز المناسب.

التحكم الصوتي بشكل منفصل
تحكم في قابس Linkind Homekit باستخدام أوامر صوتية بسيطة عبر Apple HomeKit و Siri و Amazon Alexa و Google Assistant و SmartThings، دون الحاجة إلى إدخال مادي مثل الأزرار أو المفاتيح.

التحكم في المجموعة بالكامل
إدارة موحدة للمقابس الذكية بناءً على تسمية المجموعة



أنشئ منزلك الذكي
استخدم القابس الذكي Linkind Matter للتحكم في الأجهزة الأخرى المتصلة به وإنشاء تجربة معيشة منزلية ذكية.



إعداد سهل، تحكم واحد
لا حاجة لتنزيل تطبيقات مختلفة للمصنعين بعد الآن.
توجه مباشرة إلى منصات المنزل الذكي مثل Apple Home، Alexa، Google Home، SmartThings، أو AiDot للتحكم في جميع أجهزتك المتوافقة مع Matter.

المؤقت والجدولة
يمكنك جدولة الأجهزة المرتبطة بالقابس الذكي Linkind Matter لتشغيلها أو إيقاف تشغيلها في أوقات محددة.

التحكم عن بعد عبر التطبيق
استخدم التطبيق لتشغيل الأجهزة الإلكترونية قبل وصولك إلى المنزل وإيقاف تشغيلها بعد مغادرتك، بغض النظر عن مكان وجودك.

تسمية كل منها بشكل خاص
تسمية كل منفذ تجعل من السهل إدارة الجهاز المناسب.

التحكم الصوتي بشكل منفصل
تحكم في قابس Linkind Homekit باستخدام أوامر صوتية بسيطة عبر Apple HomeKit و Siri و Amazon Alexa و Google Assistant و SmartThings، دون الحاجة إلى إدخال مادي مثل الأزرار أو المفاتيح.

التحكم في المجموعة بالكامل
إدارة موحدة للمقابس الذكية بناءً على تسمية المجموعة



Specification
| Brand | Linkind |
| Connector Type | Plug in |
| Specification Met | Fcc |
| Controller Type | Apple HomeKit, Google Assistant, SmartThings, Amazon Alexa |
| Control Method | App, Remote, Voice |
| Connectivity Protocol | Wi-Fi |
FAQ
Scan code prompt error / no response
+Please confirm whether the App software version meets the minimum version requirements.
Can't scan the QR code on the device
+The QR code may not be scanned when the device is turned on, you can try to scantheQR code on the instruction manual.
Prompt that the device cannot be found
+Network distribution for the first time (the device is in the factory state): please power onthe device again, and confirm that the device is in the factory state. Confirm that the power-on time does not exceed 15 minutes. b.Multi-ecological distribution network (the device has been configured and shared withother hub/apps): please confirm that all devices are in the same office In the local area network (connected to the same router), and the device pairing modehasbeen turned on (see the above Share to other ecology step).
Failed to add device
+A: a.Please confirm that the mobile phone using the App is connected to 2.4GHz WiFi andthe hub(controllers) is also connected to the same router Down. a. You can try to restart the hub/controller, App or mobile phone.
Device shows offline
+a.Please try controlling the device to see if it responds normally b.If the device does not respond, please try to power on the device again, and wait for 2minutes to check whether the device is back online.